Skip to content
Battery Recycling Equipment Manufacturing Engineering · Manufacturing · Global Service
Production line category

Solar Panel Crushing & Recycling

Explore Production Lines Get Line Selection Support
1Production lines
02 / Production Line Range

Different process routes for different recycling objectives

Each card locates a line by feedstock, core route and recovered outputs — not by unverified capacity or purity claims.

CONFIGURABLE

Solar Panel Recycling Line

Best for: An integrated industrial line configured around end-of-life crystalline silicon pv modules, target output quality and required throughput.

FeedstockEnd-of-life crystalline silicon PV modules Recovery ObjectiveGlass separation and classified fractions Typical ProcessJunction-box/frame removal → thermal softening → glass separation → shredding → milling → classification ConfigurationThe final route is defined after feedstock review and, where appropriate, material testing.
  1. Junction-box/frame removal
  2. thermal softening
  3. glass separation
  4. shredding
  5. milling
  6. classification

View Production Line → Solar Panel Recycling Solution →

03 / Line Selection Guide

Start with the feedstock and recovery objective

The three-step guide narrows a line type for evaluation. It does not replace process engineering.

Selection result / indicative

Start with feedstock, output and project stage.

Choose the three inputs to see whether this category is relevant to evaluate first.

07 / Engineering & Project Criteria

A production line is selected around the whole project

These criteria are project-level. They are not equivalent to choosing a single machine from a catalogue.

Feedstock Condition
Chemistry, format, state of charge, contamination and whether the material is a pack, cell, mixed scrap or production sheet determine the legal and technical start of the line.
Target Capacity
Throughput is engineered after the process route is agreed. Capacity is customized; this page does not publish a confirmed range.
Recovery Objective
Reusable cells, prepared feed, black mass, metal fractions or powder / foil each imply a different process end-point and equipment set.
Plant Space
Layout, building height, maintenance access and material-flow direction constrain whether a route is compact, modular or staged across rooms.
Utilities
Power, compressed air, water, negative-pressure ducting and control architecture are sized to the full line, not to one crusher.
Safety & Environmental Requirements
Discharge, fire, explosion, dust, off-gas and local regulation decide pretreatment depth and environmental-control modules.
Also reviewed at project stage Automation level Local regulations Future expansion Material variability
09 / Production Line Enquiry

Request a preliminary process configuration

Share your feedstock, target capacity, required outputs and plant conditions. This information is used to evaluate a suitable process route and equipment configuration.

Prepare if available:
Feedstock photos, material condition, desired fractions, available plant area, utilities and current project stage.

Request Production Line Selection Support